Changing wheels – BMW Z4 sDrive35i 2009 User Manual
Page 213
211
2.
Pull out the bulb holder, see arrow, and
change the bulb.
3.
Attach the bulb holder.
4.
Reattach the cover.
License plate lamp, rear lamp, center
brake lamp and turn signal
These lamps use LED technology for operation.
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Changing wheels
Your BMW is equipped with Run-Flat Tires as
standard. This removes the need to change a
wheel immediately in the event of a puncture.
For information on continuing to drive with a
damaged tire, refer to Indication of a flat tire on
page
The symbol identifying Run-Flat Tires is a circle
with the letters RSC on the sidewall, refer to
Run-Flat Tires, page
.
When mounting new tires or changing over
from summer to winter tires and vice versa,
mount Run-Flat Tires for your own safety. In the
event of a flat, no spare wheel is available. Your
BMW center will be glad to advise you. Refer
also to New wheels and tires, page
The tools for changing wheels are avail-
able as optional accessories from your
BMW center.
<
Jack mounting points
The jacking points are at the positions shown in
the illustration.
Lug bolt lock*
1 Lug bolt for adapter
2 Adapter, in onboard tool kit
Removing the wind deflector
1.
Remove the adapter
2 from the onboard
tool kit and insert it in the lug bolt.
2.
Unscrew the lug bolt
1.
Remove the adapter after screwing the lug bolt
back on.
The code number is stamped on the front of the
adapter. Please note down this number and
keep it in a safe place in case the adapter should
get lost.
Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG