beautypg.com

Maintenance, Bmw maintenance system, Condition based service cbs – BMW 550i xDrive Sedan 2011 User Manual

Page 260: Socket for obd onboard diagnosis

background image

Maintenance

BMW Maintenance System

The maintenance system directs you to re‐
quired maintenance measures and thereby sup‐
ports you in maintaining road safety and the op‐
erational reliability of the vehicle.

Condition Based Service CBS

Sensors and special algorithms take into ac‐
count the driving conditions of your vehicle.
Based on this, Condition Based Service deter‐
mines the maintenance requirements.
The system makes it possible to adapt the
amount of maintenance you need to your user
profile.
Details on the service requirements, refer to
page

74

, can be displayed on the Control Dis‐

play.

Service data in the remote control

Information on the required maintenance is con‐
tinuously stored in the remote control. Your
service center will read out this data and suggest
the right array of service procedures for your ve‐
hicle.
Therefore, hand your service specialist the re‐
mote control that you used most recently.

Storage periods

Storage periods during which the vehicle bat‐
tery was disconnected are not taken into ac‐
count.
If this occurs, have a service center update the
time-dependent maintenance procedures,
such as checking brake fluid and, if necessary,
changing the engine oil and the microfilter/acti‐
vated-charcoal filter.

Service and Warranty

Information Booklet for US

models and Warranty and

Service Guide Booklet for

Canadian models

Please consult your Service and Warranty Infor‐
mation Booklet for US models and Warranty and
Service Guide Booklet for Canadian models for
additional information on service requirements.
Maintenance and repair should be performed by
your service center. Make sure to have regular
maintenance procedures recorded in the vehi‐
cle's Service and Warranty Information Booklet
for US models, and in the Warranty and Service
Guide Booklet for Canadian models. These en‐
tries are proof of regular maintenance.

Socket for OBD Onboard

Diagnosis

There is an OBD socket on the driver's side for
checking the primary components in the vehicle
emissions.

Emissions

The warning lamp lights up:
Emissions are deteriorating. Have
the vehicle checked as soon as pos‐
sible.

The warning lamp flashes under cer‐
tain circumstances:

Seite 260

260

Online Edition for Part no. 01 40 2 606 469 - 03 11 490

Maintenance

This manual is related to the following products: