Surround view, Backup camera, Can be – BMW 550i xDrive Sedan 2011 User Manual
Page 113
If the backup camera image was selected last, it
again appears on the display. To switch to PDC:
1.
"Rear view camera" Select the symbol
on the Control Display.
2.
Press the controller.
The setting is stored for the remote control cur‐
rently in use.
Zoom view*
On the left part of the display screen, the vehicle
is shown enlarged.
▷
Forward gear or transmission position D en‐
gaged: front area of the vehicle.
▷
Reverse gear or transmission position R en‐
gaged: rear area of the vehicle.
Display on the Control Display
Switching on the backup camera via the
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The set‐
ting is stored for the remote control currently in
use.
Malfunction
A Check Control message is displayed.
On the Control Display, the areas in front of and
behind the vehicle are shaded. PDC has failed.
Have the system checked.
To ensure full operability:
▷
Keep the sensors clean and free of ice.
▷
When using a pressure washer, keep the
sprayer moving and maintain a distance of
at least 12 in/30 cm from the sensors.
Surround View*
The concept
Surround View includes the following systems:
▷
Backup camera, refer to page
.
▷
Side View, refer to page
▷
.
It assists the driver when parking, maneuvering
and on blind driveways and intersections.
Backup camera*
The concept
The backup camera provides assistance in park‐
ing and maneuvering backwards. The area be‐
hind the vehicle is shown on the Control Display.
System limits
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an accident
could result from road users or objects located
outside the picture area of the backup camera.◀
Seite 113
113
Online Edition for Part no. 01 40 2 606 469 - 03 11 490