BMW 760Li Sedan 2012 User Manual
Page 79
Time of arrival*
The estimated time of arrival is
displayed if a destination is en‐
tered in the navigation system*
before the trip is started.
The time must be correctly set.
Speed limit
Display of a speed limit which, when reached,
should cause a warning to be issued.
Renewed warning if the vehicle speed drops be‐
low the set speed limit once by at least 3 mph/
5 km/h.
Displaying, setting or changing the
limit
1.
"Settings"
2.
"Speed"
3.
"Warning at:"
4.
Turn the controller until the desired limit is
displayed.
5.
Press the controller.
The speed limit is stored.
Activating/deactivating the limit
1.
"Settings"
2.
"Speed"
3.
"Warning"
4.
Press the controller.
Applying your current speed as the
limit
1.
"Settings"
2.
"Speed"
3.
"Select current speed"
4.
Press the controller.
The current vehicle speed is stored as the
limit.
Resetting values
The average fuel consumption and average
speed can be reset.
Press and hold the computer button on the turn
signal lever.
Trip computer
There are two types of computer.
▷
"Onboard info": the values can be reset as
often as necessary.
▷
"Trip computer": the values provide an over‐
view of the current trip.
Resetting the trip computer
1.
"Vehicle Info"
2.
"Trip computer"
3.
"Reset": all values are reset.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle comes to a
standstill.
Display on the Control Display
Display the computer or trip computer on the
Control Display.
1.
"Vehicle Info"
2.
"Onboard info" or "Trip computer"
Seite 79
79
Online Edition for Part no. 01 40 2 606 497 - 03 11 490