beautypg.com

BMW 760Li Sedan 2012 User Manual

Page 261

background image

Do not touch the bulbs
Do not touch the glass of new bulbs with

your bare hands, as even minute amounts of
contamination will burn into the bulb's surface
and reduce its service life.
Use a clean tissue, cloth or something similar, or
hold the bulb by its base.◀

Light-emitting diodes (LEDs)

Light-emitting diodes installed behind a cover
serve as the light source for controls, display el‐
ements and other equipment.
These light-emitting diodes, which are related
to conventional lasers, are officially designated
as Class 1 light-emitting diodes.

Do not remove the covers
Do not remove the covers, and never stare

into the unfiltered light for several hours; other‐
wise, irritation of the retina could result.◀

Headlamp glass

Condensation can form on the inside of the ex‐
ternal lamps in cool or humid weather. When the
light is switched on, the condensation evapo‐
rates after a short time. The headlamp glasses
do not need to be changed.
If there is a large amount of moisture, e.g., water
droplets form in the lamp, have it checked by
your service center.

Front lamps, bulb replacement

At a glance

1 Adaptive light control
2 Parking lamp, daytime running lights*

3 Low beams/high beams
4 Turn signal

Xenon lamps

Because of the long life of these bulbs, the like‐
lihood of failure is very low. Switching the lamps
on and off frequently shortens their life.
If a xenon bulb fails, switch on the front fog lamps
and continue the trip with great care. Comply
with local regulations.

Do not perform work/bulb replacement on
xenon headlamps

Have any work on the xenon lighting system, in‐
cluding bulb replacement, performed only by a
service center.
Due to the high voltage present in the system,
there is the danger of fatal injuries if work is car‐
ried out improperly.◀

For checking and adjusting headlamp aim,
please contact your BMW center.

Turn signals, incl. side indicators

Follow the general instructions on lamps and
bulbs, refer to page

260

.

These lamps are made using LED technology.
Please contact your service center in the event
of a malfunction.

Adaptive light control

Follow the general instructions on lamps and
bulbs, refer to page

260

.

The illustration shows the left side of the engine
compartment.
55-watt bulb, H3.

Seite 261

261

Online Edition for Part no. 01 40 2 606 497 - 03 11 490

Reference

Mobility

Communication

Entertainment

Navigation

Driving tips

Controls

At a glance