BMW 760Li Sedan 2012 User Manual
Page 73
When the ignition is switched off, refer to
page
, position P is engaged automatically.
P Park
Select only when the vehicle is stationary. The
drive wheels are blocked.
P is engaged automatically:
▷
After the engine is switched off, if the car is
in radio ready state, refer to page
, or if the
ignition is switched off, refer to page
, and
if position R or D is engaged.
▷
If the ignition is switched off and position N
is engaged.
▷
If the safety belt is unbuckled, the driver's
door is opened, and the brake pedal is not
pressed while the vehicle is stationary and
transmission position R or D is engaged.
Kickdown
Kickdown is used to achieve maximum driving
performance. Press on the accelerator beyond
the resistance point at the full throttle position.
Engaging the transmission position
▷
Transmission position P can only be disen‐
gaged if the engine is running and the brake
pedal is pressed.
▷
With the vehicle stationary, press on the
brake pedal before shifting out of P or N;
otherwise, the shift command will not be
executed: shift lock.
Depress the brake until you start driv‐
ing
To prevent the vehicle from creeping after
you select a driving position, maintain pres‐
sure on the brake pedal until you are ready
to start.◀
Engaging D, R and N
Briefly push the selector lever in the desired di‐
rection, beyond a resistance point if necessary.
After releasing the selector lever, it returns to its
center position.
Press the Unlock button to:
▷
Engage R.
▷
Shift out of P.
Engaging P
Press button P.
Seite 73
73
Online Edition for Part no. 01 40 2 606 497 - 03 11 490