EcoPure MW_MW40_450216 - Manual (Page 4)

..................................................AUTOMATIC WATER SOFTENER
SPECIFICATIONS / DIMENSIONS
MODEL MW-40
RATED CAPACITY See Rating Decal, Located On The Softener
RATED EFFICIENCY ! See Rating Decal, Located On The Softener
AMOUNT OF HIGH CAPACITY RESIN (lbs / cu ft) 55.1 / 1.06
RESIN TANK NOMINAL SIZE (in., dia x height) 9 x 40
SERVICE FLOW RATE (gpm) 10
PRESSURE DROP AT SERVICE FLOW 14
WATER SUPPLY MAXIMUM HARDNESS (gpg) 110
WATER SUPPLY MAX. CLEAR WATER IRON (ppm) " 8
WATER PRESSURE LIMITS (min. / max. psi) # 20 – 125
WATER TEMPERATURE LIMITS ( o F) 40 – 120
WATER SUPPLY MINIMUM FLOW RATE (gpm) 3
REGENERATION CYCLE FLOW RATES (gpm)
FILL (flow to brine tank) .3
BRINING 0.22
BRINE RINSE 0.15
BACKWASH 2.0
FAST RINSE
(flow to drain)
2.0
These systems conform to NSF/ANSI 44 for specific performance claims as verified and substantiated by test data.
! Efficiency rating is only valid at the lowest salt dosage. These softeners were efficiency rated according to NSF/ANSI Standard 44.
" Capacity to reduce clear water iron is substantiated by WQA test data.
# Canada working pressure: 1.4 – 7.0 kg/cm2.
MW-40
4