Dogtra EDGE RT - Manual (Page 9)

15 16
7. The LED indicator
7KH/('LQGLFDWRUÀDVKHVHYHU\VHFRQGVZKHQWKHUHFHLYHU
is on and ready for use. The LED indicator will blink on both
the transmitter and the receiver when the transmitter buttons
are pressed.
The LED indicator color indicates the battery life level.
Green = Fully charged, Amber = Medium, Red 1HHGV
charging
If the unit is used while the LED indicator is red, it will shut
down automatically.
8. Charging the battery
1. Lift the rubber-charging cap and plug in the charger.
2. Plug the adapter’s power plug in to a standard AC wall outlet.
7KH/('LQGLFDWRURQWKHWUDQVPLWWHUDQGUHFHLYHUFROODUZLOO
turn red.
3. When the unit is fully charged, the LED indicator will turn
JUHHQRQERWKWKHWUDQVPLWWHUDQGUHFHLYHUFROODU8QSOXJWKH
adapter’s power plug from the AC wall outlet and disconnect
the charger from the unit.
4. Place the rubber-charging cap back over the charging port.
7KHWUDQVPLWWHUDQGUHFHLYHUFROODUUXEEHUFKDUJLQJFDSHQVXUHV
dirt and debris does not build up in the charging port area. The
unit is waterproof even if the rubber-charging cap is not fully
closed.
Using the EDGE RT as a 2 or 3 Dog System
7RFKDUJHPXOWLSOHUHFHLYHUVFROODUVDQGDWUDQVPLWWHUFRPELQH
additional splitter cables as shown above.
Connect 2 splitter cables together to charge all parts of a 2-dog
system, or connect 3 splitter cables together to charge all parts of
a 3-dog system, at the same time.
* Warning
)XOO\FKDUJHWKHXQLWEHIRUHWKH¿UVWXVH
'RQRWFKDUJHWKHXQLWQHDUDQ\ÀDPPDEOHVXEVWDQFHV
3. Fully charge the unit before storing for one month or longer.
4. Always use Dogtra approved charging adapters.