Dogtra EDGE RT - Manual (Page 11)

19
11. How to attach the belt clip on the EDGE RT
To attach the included belt clip to the transmitter, follow the
instructions below.
1. Align the belt clip to the grooves on the back of the
transmitter.
:LWKD¿UPJULSVFUHZRQWKHEHOWFOLSXVLQJWKHSURYLGHG
Philips head screws.
Caution! 7LJKWHQXQWLO¿UPO\LQSODFH%HFDUHIXOQRWWRRYHUWLJKWHQ
Do not touch the contact points of the receiver/collar
while code setting the EDGE RT. If you do so, you may
receive an electric stimulation.
Also, do not attempt to code set the device while the
receiver/collar is in contact with dogs, other animals,
or people.
4. Within 5 seconds of separating
WKHWUDQVPLWWHUDQGUHFHLYHU
collar, hold down the top
RUDQJHFRQVWDQWEXWWRQRQWKH
front of the transmitter and the
Pager button on the back of the
transmitter at the same time.
The code setting is complete
when the LED indicator
resumes blinking every 4
VHFRQGVRQWKHUHFHLYHUFROODU