Dogtra EDGE RT - Manual (Page 7)

11 12
2. The Stimulation/Combination buttons
The handheld transmitter uses 4 buttons to send stimulation.
The LED indicator will blink on both the handheld transmitter
DQGWKHUHFHLYHUFROODUZKHQWKHVWLPXODWLRQEXWWRQVDUH
pressed.
1) Constant Stimulation
The two orange buttons on the
front of the transmitter control
3 levels of Constant stimulation.
- Low Power Constant:
Press the lower orange button
for Low Power Constant
stimulation.
- Medium Power Constant:
Press the top orange button
for Medium Power Constant
stimulation.
- High Power Constant:
Press both orange buttons
together for High Power
Constant stimulation.
2) Nick Stimulation
The two black buttons on the front of the transmitter control
OHYHOVRI1LFNPRPHQWDU\VWLPXODWLRQ
- Low Power Nick: Press the lower black button for Low
3RZHU1LFNPRPHQWDU\VWLPXODWLRQ
- Medium Power Nick: Press the top black button for Medium
3RZHU1LFNPRPHQWDU\VWLPXODWLRQ
- High Power Nick: Press both black buttons together for High
3RZHU1LFNPRPHQWDU\VWLPXODWLRQ
* Holding down the constant stimulation
buttons will activate for a maximum of
12 seconds. After 12 seconds of constant
stimulation, the stimulation will reset. The
stimulation reactivates once the constant
button is released and pressed again.
3) Pager vibration
The Pager vibration button is located on the back of the
handheld transmitter. The LED indicator will blink on both the
KDQGKHOGWUDQVPLWWHUDQGWKHUHFHLYHUFROODUZKHQWKH3DJHU
button is pressed.
* Holding down the Pager button will activate for a maximum
of 12 seconds, until it is released and pressed again.
12 sec.
Low
power
constant
Low
power
nick
High
power
constant
High
power
nick
Medium
power
constant
Medium
power
nick