Dogtra EDGE RT User Manual

Page 10

9. How to change the length of the contact points
7KH'RJWUD('*(57FRPHVHTXLSSHGZLWKVWDQGDUG´

FRQWDFWSRLQWVWKDWFDQEHH[WHQGHGWR´FRQWDFWSRLQWVIRUXVH
with dogs with longer coats.

7RLQFUHDVHWKHFRQWDFWSRLQWOHQJWKIURP´WR´IROORZWKH
steps below.
1. UsinJWKHLQFOXGHGDGMXVWPHQWWRROZLWKWKHVLGHPDUNHG´

unscrew the contact points counter-clockwise.

3ODFHWKHFRQWDFWSRLQWH[WHQVLRQRYHUWKHH[SRVHGWKUHDGVÀDW

side down.

3. Place the contact points over the extensions and tighten the

FRQWDFWSRLQWVDQGH[WHQVLRQVFORFNZLVHXVLQJWKHDGMXVWPHQW

WRROZLWKWKHVLGHPDUNHG´

&DXWLRQ7LJKWHQXQWLO¿UPO\LQSODFH%HFDUHIXOQRWWRRYHU

tighten.

7RVKRUWHQWKHFRQWDFWSRLQWVEDFNWRWKHVWDQGDUG´VWDUW

ZLWKWKHDGMXVWPHQWWRROZLWKWKHVLGHPDUNHG´UHPRYHWKH
contact point extensions, and tighten the contact points with the

DGMXVWPHQWWRROZLWKWKHVLGHPDUNHG´

10. Code setting
To set the coding for the Dogtra EDGE RT transmitter to an

H[LVWLQJUHFHLYHUFROODURUDQ$GGLWLRQDOUHFHLYHUFROODUIROORZ
the steps below.

1. Set the stimulation dial to level

1, and select between dog 1, 2,
and 3 with the dog selector dial
on the handheld transmitter.

:LWKWKHUHFHLYHUFROODUWXUQHG

off, hold the red dot on the
front of the transmitter to the

UHGGRWRQWKHUHFHLYHUFROODU
for about 5 seconds.

3. IMPORTANT! Place the

UHFHLYHUFROODUDVLGHZKHQWKH
LED indicator rapidly blinks

JUHHQRQWKHUHFHLYHUFROODU
Take caution not to touch the

FRQWDFWSRLQWVRQWKHUHFHLYHU
collar during step 3 or you may
receive an electric stimulation.