Dogtra 1900 Series - Manual (Page 9)

14
BUTTON FUNCTION
“Constant” Button
The “Constant” button is located on the
bottom left. Pressing the “Constant” button
gives continuous stimulation as long as the
button is pushed, for up to 12 seconds. If the
button is not released after 12 seconds, the
stimulation will automatically turn off as a
safety feature. The collar will be ready to be
reactivated once the button has been released.
“Pager” Button
The “Pager” button is located on the face of
the transmitter. Pressing it will give non-
stimulating vibration as long as the button is
depressed, for up to 12 seconds.
Transmitter Power ON/OFF
The button on the right side of the
transmitter is the “ON/OFF” button that
activates the transmitter and LCD screen only.
To turn the transmitter on, press the
“ON/OFF” button on the right side until the
LCD screen illuminates.
To turn the transmitter off, press the
“ON/OFF” button on the right side of the
transmitter. When the LCD screen displays
“OFF” release the button.
15
BUTTON FUNCTION
The two-dog
unit has five buttons and a toggle switch on the
transmitter. (two on the face of the transmitter,
two on the left side, and one on the right side.)
“Nick” & “Constant” Toggle Switch
Located on the face of the transmitter is a
toggle switch. The toggle switch has a setting
for “Nick” and another for Constant . The
color-coordinated buttons (orange for the
orange receiver/collar and gray for the black
receiver/collar) will implement the desired
stimulation based on the toggle switch setting.
(2-dog)
Nick/Cont.
Toggle Switch
1 st -dog
Pager
(Gray Button)
2 nd -dog
Pager
(Orange Button)
ON/OFF
Switch
1 st -dog
Nick & Cont.
(Gray Button)
2 nd -dog
Nick & Cont.
(Orange Button)