Dogtra 1900 Series - Manual (Page 8)

12
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Battery Charging Receptacle &
Rubber Plug
Located on the backside of the transmitter,
the charging receptacle is covered by a rubber
plug. Insert one end of the battery charging
cable into the receptacle to charge the battery
(See Battery Charging Procedure on page 27).
After charging is completed, close the
receptacle with its rubber plug to make sure dirt
or water does not get inside.
13
BUTTON FUNCTION
The transmitter for the
single dog unit has four buttons (one on the
face of the transmitter, two on the left side and
one on the right side).
BUTTON FUNCTION
Nick
Pager
ON/OFF
Switch
Constant
(1-dog)
“Nick” Button
The “Nick” button is located on the top left.
It is imprinted with the letter “N” for an easy,
clear selection. When the “Nick” button is
pushed the receiver emits a single, rapid pulse
of electrical stimulation.