Dogtra 1900 Series - Manual (Page 12)

20
BATTERY CHARGER
The battery charger and charging cables
allow you to charge both the transmitter and
receiver at the same time. The battery charger is
designed for a 120-volt wall outlet. (European
230-volt AC chargers and 12-volt field charger
for your automobile are also available.)
To use the battery charger for the two-dog
unit, combine both sets of battery charging
(splitter) cables as shown. This enables you to
charge the transmitter and both receivers at the
same time.
NOTE : Only use Dogtra-approved Chargers
for your Dogtra e-collar. This will prevent
any damage that can be incurred from
attempting to use a different charger.
BATTERY CHARGER
Charging Cable
120 volt
Charger
Wall Outlet
Two-dog unit only
21
TESTING
1. Turn the collar/receiver on by pressing the
ON/OFF button on the receiver. The
indicator light will come on for a moment
then blink once every 2 seconds, showing
that the collar is ready to use. (If the
indicator light is red, or if there is only 1 bar
showing on the battery icon on the LCD
transmitter screen, the unit needs to be
charged.)
2. Place the test light included in the package
contents on the contact points as shown in
the diagram.
TESTING YOUR
COLLAR