Dell u2410 User Manual

Page 26

PIP Mode

When PIP/PBP activated

PIP Source

Size

Position

Contrast

Hue

Saturation

Back

PIP/PBP submenu when PIP/PBP ON (main source is VGA/DVI-D input)

PIP/PBP submenu when PIP/PBP ON

NOTE:

When using DVI source, the Auto adjustment is not available.

There are two modes: Picture in Picture (PIP) and Picture by Picture (PBP)

Use

and

to browse and

to select "Off", "PIP" or "PBP".

When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.

Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/Composite/Component)

Use

and

to browse and

to select.

Select PIP window size.

Use

and

to browse and

to select.

Select PIP window position.

Use

and

to browse and

to select.

Adjust the contrast level of the picture in PIP/PBP Mode.

reduces the contrast

increases the contrast

This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.

shifts image color towards green

shifts image color towards purple

Adjust the color saturation of PIP/PBP image.

makes the image look more monochrome

makes the image look more colorful

Touch

to go back to the main menu.