Dell u2410 - Manual (Page 21)

Using the OSD Menu
1. Touch to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
Or
Main Menu for non Analog (non VGA) Input
2. Touch the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
table for a complete list of all the options available for the monitor.
3. Touch the button once to activate the highlighted option.
4. Touch and button to select the desired parameter.
5. Touch to enter the slide bar and then use the and buttons, according to the indicators on the menu, to make your changes.
5
Exit
Use this key to exit the OSD menu.
6
Power button
(with power light
indicator)
Use the power button to turn the monitor on and off.
The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor
automatically saves the changes. The changes are also saved if you change the settings and then wait for the
OSD menu to disappear.
NOTE: Auto Adjust is only available when you are using the analog (VGA) connector.