Dell u2410 User Manual

Page 23

Scan Sources

VGA

DVI-D 1 & 2

DisplayPort

HDMI

Component

Composite

Back

Scan for Sources, touch

to scan for available input signals.

Select VGA input when you are using the analog (VGA) connector. Touch

to select the VGA input source.

Select DVI-D input when you are using the Digital (DVI) connector. Touch

to select the DVI input source.

Select DisplayPort input when you are using DisplayPort connector. Touch

to select the DisplayPort input source.

Select HDMI input when you are using HDMI connector. Touch

to select the HDMI input source.

Select Component input when you are using component video connector. Touch

to select the component input source.

Select Composite input when you are using composite video connector. Touch

to select the composite input source.

Touch

to go back to the main menu.

Color Settings

Input Color Format

Gamma

Mode Selection

Preset modes

Allows you to set the image mode and color format.

Image mode submenu for VGA/DVI-D input(when DVI-D input, Auto Adjust is non-available)

Image mode submenu

NOTE:

Image modes are different between the VGA/DVI-D and Video inputs.

Choose the RGB option if monitor is connected to a computer or a DVD using a VGA or DVI cable. Choose the YPbPr option if monitor is connected to a DVD by a YPbPr to VGA or YPbPr to DVI cable or if the DVD color
output setting is not RGB.

Allows you to set the color mode to PC or MAC.

Allows you to set the display mode to Graphics or Video. If your computer is connected to your monitor, choose Graphics. If a DVD, STB, or VCR is connected to your monitor, choose Video.