Replacing the camera module – Dell Inspiron M5040 User Manual
Page 66
2
3
4
1
1
display cover
2 tabs (2)
3
camera module
4 camera cable
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to snap the camera module
into position.
4 Replace the display bezel. See "Replacing the Display Bezel" on page 60.
5 Replace the display assembly. See "Replacing the Display Assembly" on
6 Replace the hinge cover. See "Replacing the Hinge Cover" on page 53.
7 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
8 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Camera Module
66