Replacing the usb board – Dell Inspiron M5040 User Manual
Page 44
1 2
3
1
USB-board cable
2 USB board
3
tabs (2)
Replacing the USB Board
1 Follow the procedures in "Before You Begin" on page 9.
2 Slide the connectors on the USB board into the slots on the computer base
and snap the USB board into place.
3 Slide the USB-board cable into the connector on the USB board. Press
down on the connector latch to secure the USB-board cable to the
connector on the USB board.
4 Replace the hard drive. See "Replacing the Hard Drive" on page 39.
5 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
6 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
USB Board
44