Replacing the hard drive, 2 remove the new hard drive from its packaging, 3 place the hard drive on the computer base – Dell Inspiron M5040 User Manual
Page 39: 6 replace the two screws to the computer base
1
1
hard drive
Replacing the Hard Drive
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3 Place the hard drive on the computer base.
4 Push the hard drive towards the left to connect it to the connector on the
system board.
5 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
6 Replace the two screws to the computer base.
7 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Hard Drive
39
This manual is related to the following products: