beautypg.com

Iso sensitivity settings, Auto iso sensitivity – Nikon D3000 User Manual

Page 138

background image

120

i

Adjust ISO sensitivity (

0 62).

❚❚Auto ISO Sensitivity

If Off is chosen for Auto ISO sensitivity in P, S, A, and M modes,
ISO sensitivity will remain fixed at the value selected by the user
(

0 62). When On is chosen, ISO sensitivity will automatically be

adjusted if optimal exposure can not be achieved at the value
selected by the user (ISO sensitivity is adjusted appropriately
when the flash is used). The maximum value for auto ISO
sensitivity can be selected using the Max. sensitivity option in the Auto ISO
sensitivity
menu (choose lower values to prevent noise; the minimum value for auto
ISO sensitivity is automatically set to ISO 100). In modes P and A, sensitivity will only
be adjusted if underexposure would result at the shutter speed selected for Min.
shutter spd
. Slower shutter speeds will be used only if optimum exposure can not
be achieved at the ISO sensitivity value selected for Max. sensitivity. If the ISO
sensitivity selected by the user is higher than the value selected for Max. sensitivity,
the value selected for Max. sensitivity will be used instead.

When On is selected, the viewfinder shows ISO-AUTO and the
information display ISO-A. These indictors blink when sensitivity
is altered from the value selected by the user.

ISO Sensitivity Settings

G button

➜ C shooting menu

A

Auto ISO Sensitivity Control

Noise is more likely at higher sensitivities. Use the Noise reduction option in the shooting
menu to reduce noise (

0 122). Note that ISO sensitivity may be raised automatically when

auto ISO sensitivity control is used in combination with slow sync flash modes (available with
the built-in flash and SB-900, SB-800, SB-600, and SB-400 flash units), possibly preventing the
camera from selecting slow shutter speeds.