Cooper Instruments & Systems Dytran 5340 USB Triaxial Accelerometer - Manual (Page 7)

REV B 10/18/12, ECN 8972
7
Run VibraScout™ (All Programs ‐> Dytran ‐> VibraScout™). After detecting the 7543A, the
software will perform a self‐test to verify that the device is functioning properly and then
display the VibraScout™ application.
8 GUI layout & Description of Software Features
1. Configuration Screen
Figure 8: Configuration Window
2. File Menu
All GUI fields (bandwidth selection, FFT plot selections, etc) are stored in a configuration file.
Fields are read from the default file VibraScoutConfig.xml when VibraScout™ is launched.
The file is updated by selecting
SaveGUI Settings from the File menu. Fields may also be
saved to other filenames using Save GUI Settings As and then read back using Load GUI
Settings . This feature is useful for saving/loading location‐specific parameters. The name of
the current file is displayed below the menu bar.