Cooper Instruments & Systems DFR 1250 Two Channel Paperless Recorder User Manual
Page 6

TSFM
500
DC
4
32-1101
REV
2
710
5 TEST PARAMETER SETUP
This section provides configuration instructions for each test parameter. The initial Test Parameter Setup screen appears
as follows:
When the parameters have been configured as desired and are ready to be saved, press ESC to exit Test Parameter
Setup. The screen will show SAVE CHANGES? Pressing YES will save the changes and the display will revert to current
status. Pressing NO will not save the changes and return to the Test Parameter Setup menu.
Note: Changes can be made to an unlimited number of settings before saving.
This manual is related to the following products: