Cooper Instruments & Systems DFR 1250 Two Channel Paperless Recorder - Manual (Page 14)

TSFM 500 DC 12 32-1101 REV 2 710
5.13 Default Settings (DEFAULT?)
This setting provides a quick return to factory settings, as follows:
UP SPEED: Depends on test stand
DN SPEED: Depends on test stand
AUTO RETURN: off
CYCLING:
00000 (off)
CW L: 1 revolution
CCW L: 1 revolution
OVERLOAD V: OFF
OVERLOAD:
100%
CONTROL: CONSOLE
BAUD RATE: 19200
STOP & PAR: 8-1n
UNITS: Depends on test stand
PASSWORD: 0000 (off)
KEYS: maintained
Default setting: off
Available settings: off, on
5.14 Password (NEW PWORD)
If desired, a password can be set to prevent unwanted changes to test parameters. The password can be set to any
number between 0000 and 9999. The default setting of 0000 indicates that the password is disabled, and that the user
can freely enter the Test Parameter Setup menu. If misplaced or forgotten, the password may be reset. Contact Mark-10
for instructions.
Default setting: 0000 (off)
Available settings: 0000 – 9999