Bio-Rad Model 111 Mini IEF Cell - Manual (Page 2)

Note
To insure best performance from the Model 111 Mini IEF Cell, become fully acquainted with these
operating instructions before using the cell to separate samples. Bio-Rad recommends that you first read
these instructions carefully. Then assemble and disassemble the cell completely without casting a gel. After
these preliminary steps, you should be ready to cast and run a gel.
Bio-Rad also recommends that all Model 111 Mini IEF Cell components and accessories be cleaned
with a suitable laboratory cleaner (such as Bio-Rad Cleaning Concentrate, catalog number 161-0722) and
rinsed thoroughly with distilled water, before use.
Warranty
Bio-Rad Laboratories warrants the Model 111 Mini IEF Cell against defects in materials and
workmanship for 1 year. If any defects occur in the instrument during this warranty period, Bio-Rad
Laboratories will repair or replace the defective parts free. The following defects, however, are specifically
excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an authorized
agent.
3. Use of fittings or other spare parts supplied by anyone other than Bio-Rad Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster.
6. Corrosion due to use of improper solvent or sample.
This warranty does not apply to parts listed below:
1. Platinum wire, glass plates.
For any inquiry or request for repair service, contact Bio-Rad Laboratories after confirming the model
and serial number of your instrument.
Model
Catalog No.
Date of Delivery
Serial No.
Invoice No.
Purchase Order No.