BE Pressure supply 60 Gallon Air Compressor AC5060BP - Manual (Page 14)

14
operation
WARNING
• EXTRA CARE ShOULD BE TAKEN TO AVOID pERSONAL
INJURIES WITh AUTOMATIC CONTROLLED COMpRESSORS.
WARNING
• DO NOT LEAVE ThE pOWER TO ThE COMpRESSOR
OVERNIGhT OR CONNECTED WhEN UNIT IS UNATTENDED.
1) Check unit for any damage. All compressors are tested and inspected
at the factory and supplied in perfect condition. Any damage is the
freight carriers’ responsibility and you must notify the freight company
immediately upon discovering any damage, and submit a claim. Ensure
you have documented the damage on the waybill receipt if possible.
2) Check compressor installation and wiring
3) Turn on electric power and turn pressure switch knob to “auto”.
Compressor should start running and air pressure should build up in
the air receiver as evidenced by the air receiver pressure gauge. Make
sure drain valve and outlet valve are closed.
4) When air receiver pressure reaches the pressure switch cut-out
pressure, the compressor should stop automatically and you are now
ready to start using the compressed air. As air is used, the pressure in
the air receiver will drop and cause the pressure switch to close and
this will automatically start the compressor.
5) The compressor will cycle automatically until you are finished using
compressed air and the pressure switch knob is switched to “off”.
Operation
OPERATING YOUR AIR COMPRESSOR