BE Pressure supply 60 Gallon Air Compressor AC5060BP - Manual (Page 12)

12
installation
&
operation
WARNING
• ALL WIRING INFORMATION IS STATED ON ThE ELECTRIC
MOTOR AND ON ThE pRESSURE SWITCh OR pROVIDED
WITh ThE MAGNETIC STARTER, IF SUppLIED. WII CUSTOMER
SERVICE pERSONNEL CANNOT, BY LAW, pROVIDE ANY WIRING
INFORMATION.
WARNING
• ALWAYS ChECK ThE OIL LEVEL AND QUALITY BEFORE
START–Up. DO NOT ADD OR ChANGE OIL WhILE ThE UNIT IS
RUNNING. USE ONLY RECOMMENDED NON-DETERGENT OIL.
please check the following carefully:
1) Check to see that nuts and bolts are all snug.
2) Check if the quantity and quality of oil is correct.
3) If the intake filters are dirty, they should be replaced or cleaned.
Eagle compressor oil is a non-detergent mineral oil formulated with
additives to help minimize carbon build-up, increase ring life and reduce
oil consumption, for use at ambient temperatures of 0° to 30°C (32°F -
86°F).
Regular mineral oils can also be used in the compressor.
Always use a non-detergent oil with the following specifications:
BEFORE OPERATING THE AIR COMPRESSOR
COMPRESSOR LUBRICATION
RECOMMENDED OIL
eagle compressor oil #EAOIL 10 (1 Litre)
eagle compressor oil #EAOIL 40 (4 Litres)
* Compressor originally filled with SAE 20W oil (ISO 68)
OThER AppROVED OILS
AMBIENT TEMPERATURES AT
POINT OF OPERATION
SAE VISCOSITY ISO VISCOSITY
-16°C TO 0°C (3.2°F - 32°F) SAE 10W ISO 32
1°C TO 26°C (33.8°F - 78.8°F) SAE 20W ISO 68
ABOVE 27°C (80.6°F) SAE 30W ISO 100