B&G Network Depth - Manual (Page 7)

SETTING THE DEPTH UNITS
The Network DEPTH unit can be set to display depth in
Metres M, Feet FT or Fathoms FA. The selected units are
used for displayed depth information on all Network
instruments on the entire network system.
Press DEPTH key
to display the
current depth.
Press SETUP
key. The depth
display will go
blank. Press ENTER key
if the units are to
be changed. Use S or T to
change the units.
Press ENTER key
to memorise the
change. Press DEPTH to
display current
depth.
610-HB-0501-04 7