B&G Network Depth - Manual (Page 12)

ENABLING/DISABLING THE SHALLOW ALARM
Press ALARM key
to display shallow
alarm SHA A M.
Press SETUP key,
the alarm state will
be displayed. Press ENTER key,
the display will
flash. Use S or T to
enable/disable the
alarm.
Press ENTER to
memorise the
change. Press ALARM
key, the value is
displayed.
ADJUSTING THE SHALLOW ALARM VALUE
Press ALARM key
to display shallow
alarm SHA A M.
Press SETUP key
twice, the value is
displayed. Press ENTER key,
the display will
flash. Use S or T to
adjust the value.
Press ENTER key
to memorise the
new value. Press ALARM
key, the alarm is
displayed.
610-HB-0501-04 12