B&G Network Depth - Manual (Page 16)

610-HB-0501-04 16
ADJUSTING THE ANCHOR ALARM HI LIMIT
Press ALARM key
to display anchor
alarm ANC A M. Press SETUP key
3 times to display
ANCH HI value. Press ENTER key,
the display will
flash. Use S or T to
adjust the
displayed value.
Press ENTER key
to memorise the
new value. Press ALARM key
to display the
anchor alarm.
ADJUSTING THE ANCHOR ALARM LOW LIMIT
Press ALARM key
to display anchor
alarm ANC A M.
Press SETUP key
twice to display
ANCH LOW
value.
Press ENTER key,
the display will
flash.
Use
S or T to
adjust the
displayed value.
Press ENTER to
memorise the new
value.
Press ALARM key
to display the
anchor alarm.