B&G HS2000 - Manual (Page 62)

HS 2000 User Manual
Part 4 - Installation Information
HB-0846-03
4-13
8 BUTTON FULL FUNCTION
DISPLAY WIRING DETAILS
FFD CABLE
FUNCTION
FFD CABLE
COLOUR
SYSTEM
NETWORK
REMOTE
BUTTON
Network Data -ve Green Green -
Network Data +ve White White -
Network Cable Shield Shield Shield -
Ground Black Black Blue
Supply +ve Red Red -
Remote Control Button Yellow - Red
Not used Brown - -
INSTALLATION NOTES FOR HS 2000
?? The system requires at least one FFD.
?? An FFD can be connected at any point on the system network.
?? Multiple FFD's can be used on the system network. Each can control and enter data into
the system processor memory.
?? FFD's can be used in combination with all other display types; i.e. NMEA FFD's, Halcyon
displays, 20/20 and Pilot displays.
SCREENED CABLES
?? Shielded cables are supplied to provide protection against unwanted emissions (EMC) and
must be connected in accordance with these instructions.
NETWORK TERMINATION
?? If the FFD is the last unit on the system network a network terminator MUST be fitted
across the network data wires, i.e. between the green and white wires.