B&G HS2000 - Manual (Page 36)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-23
2.10.16 Time to Waypoint
Menu Heading: WAYPOINT
Function Text: ETA WPT
Update Rate: Provided by position fixer
Units: Hours, minutes
Notes
1. Also gives ETA.
2. Requires interfaced position fixing system.
This is calculated directly by the position fixer and is based on your
speed over the ground towards the mark which it assumes will be
constant.
2.10.17 Trip Log
Menu Heading: LOG
Function Text: TRIP LOG
Update Rate: Once per second
Units: Nautical miles
Note
Individually changeable.
This is the reset log for trip recording, and reads from the moment
started, in nautical miles. It must be remembered that this is the
distance travelled through the water, not over the ground. It also
forms part of the calculation for Average Speed. A useful feature is
that if the Trip Log is reset prior to the start of a trip, when the Timer
counts down to zero the Trip Log (and any other trip functions that
have been reset) start automatically.
The Trip Log display can be expanded to 9999 nautical miles by
pressing the Enter Key.