B&G HS2000 - Manual (Page 28)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-15
(3) Press Enter again, the original page display appears
and the illumination control has returned to System Control.
Note
In order to control the lighting on analogue repeaters, at least one
FFD must be set to System Control.
2.9 OPERATING NOTES
Within the foregoing paragraphs of this part of the Manual the steps
necessary to select a specific function and/or set-up the system have
been described in detail. The remainder of this Manual contains
some detailed examples; therefore to describe further operations the
following shorthand system has been adopted.
Each successive selected menu choice will be in capitals, separated
by a
?
symbol. For instance the example in Paragraph 2.5.1, to
manually calibrate the log, would be presented as follows:
SPEED ? BOAT SPD, CALBRATE ? MANL CAL ? SINGLE
Menu choices in plain CAPITALS are the selection of the required
function. Menu choices in BOLD are the selection of the relevant
operation and are completed using the other half of the display.
2.10 OPERATING FUNCTIONS
The previous paragraphs have described how the HS 2000 System
is constructed and how to use both the keys and basic menu
structure. The following paragraphs describe each of the functions
available in greater detail and how these features can best be
applied within the boat.
2.10.1 Average Speed
Menu Heading:
SPEED
Function Text: AVG SPD
Update Rate: Once per second
Units: Knots
Average speed is a trip function that averages your speed through
the water over the period the Trip Log has been running.
Trip Log
Average Speed =
Time it has been running