Apricorn Aegis Padlock SSD - USB 3.0 Solid State Drive - Manual (Page 11)

11
Setting the Unattended Auto Lock Feature
To protect against unauthorized access if the drive is unlocked and unattended, the Aegis
Padlock can be set to automatically lock after a pre-set amount of time. In its default state,
the Aegis Padlock Unattended Auto Lock feature is turned off. The Unattended Auto Lock
can be set to activate after 5, 10 or 20 minutes.
To set the Unattended Auto Lock please uses the following steps:
1. Enter the Admin mode by pressing and holding
UNLOCK + 0 for five seconds until
the LED flashes RED . This indicates that you can enter the Admin PIN.
2. Enter the Admin PIN and press UNLOCK. The drive is in Admin Mode when the LED
has changed to solid BLUE .
3. Once in Admin mode, press UNLOCK + 6. The LED should start flashing RED and
BLUE intermittently.
4. Press one of the numbers below that corresponds to amount of time you would like
the drive to lock after no activity:
1=5 minutes
2=10 minutes
3=20 minutes
0=OFF
The Default is OFF for this feature.
5. After you have input the number, the LED should flash GREEN 3 times to indicate
that you have successfully set the Unattended Auto Lock feature.