Great Plains Power Beyond - Manual (Page 21)

page 9 of 10
ba01031
1 r4
Great Plains Manufacturing reserves the right to make changes or to add improvements to this guide at any time without notice or obligation.
PB 01/03/11
IMPORTANT: The couplers called out in the
AGCO parts books for the case drain and load
sense connections are NOT compatible and must
be changed.
Case Drain
If the tractor is not equipped with a 3/8” body size
female flat face case drain coupler, then order and
install the following parts:
Port Locations, Adaptors, & Couplers for
8600 Series / DTB Series / MT600C Series (with DIN caps)
Load
Sense
Power
Beyond
Pressure
Motor
Return
IMPORTANT: ALWAYS connect case drain first,
motor return second, then pressure line to prevent
motor damage. ALWAYS disconnect pressure line
first, motor return second, then case drain last to
prevent motor damage.
IMPORTANT: Tractor must be turned off before
connecting power beyond pressure and load sense
lines.
Motor Return
If the tractor is not equipped with 3/4” body size
ISO 7241-1 Series A female motor return coupler,
then order and install part number 4293732M2
from an AGCO dealer.
This motor return coupler is male and has a
bulkhead. Remove the bulkhead fitting from the
tractor motor return line (labeled “T”) and install
this bulkhead coupler. Also, remove the male
coupler from the motor return hose on the planter,
then install one of the 3/4” body size ISO 7241-1
Series A female coupler supplied with the planter.
Power Beyond Pressure
If the tractor is not equipped with 3/4” body size
ISO 7241-1 Series A female power beyond
pressure coupler, then order and install part
number 4293730M2 from an AGCO dealer.
This power beyond pressure coupler has a
bulkhead. Remove the bulkhead fitting from the
power beyond pressure line (labelled “P”) and
install the bulkhead coupler.
Eaton Aeroquip P/N 15.163-13-10
Parker P/N FF-371-8FO
3/4-16
FORB
Eaton Aeroquip P/N 2266-8-10S
Parker P/N 10-8-F65OX-S
Load Sense
If the tractor is not equipped with 1/4” body size
load sense coupler, then order and install the
following parts:
flush face coupler
connected to fan case drain
hose from Great Plains
}
connect to tractor
Eaton Aeroquip P/N 15.163-10-8
M18 x 1.5
DIN
3/4-16
MJIC
3/4-16
FJIC
9/16-18
MORB
Eaton Aeroquip P/N 2266-6-8S
Parker P/N 6-8-F65OX-S
}
connect to tractor
} } } } }
load sense coupler
connected to load sense
hose from Great Plains
supplied from Great Plains
(p/n 841-457C for pair) p/n 841-467C
p/n 841-466C
Case
Drain
3/4-16
MORB
7/8-14
MJIC
M22 x 1.5
DIN
7/8-14
FJIC