Great Plains Simba SL700 Operator Manual - Manual (Page 12)

12 Simba SL700
603-216M-ENG
2013-01-25
Beware of trapping hazards
when manipulating the parking
stand, OSR platform and other
hinged parts. Ensure any heavy
components are fully supported
when removing pins / bolts.
1.6 Accident Prevention
In addition to the Operating Instructions, it is
important to observe the accident prevention
regulations specified by agricultural trade
associations. It is the Operator’s responsibility
to ensure that all other persons are excluded
from the danger zones surrounding or on the
machine during its operation.
It is the Owner’s responsibility to ensure:
• the Operator is trained and competent to
use the machine & tractor,
• the tractor is suitable for the machine
• adequate Risk and COSHH assessments
have been undertaken regarding the
machine’s use. Specifically, these include
issues concerning contact with the soil,
dust, crop residues, chemicals, lubricants
and other compounds during operation or
maintenance, and the possibility of stones
being ejected at high speed during work.
1.6.1 Hitching-up the
machine
There is a risk of injury when hitching/
unhitching the machine. Observe the
following:
• Secure the machine against rolling.
• Take special care when reversing the
tractor!
• There is a risk of being crushed between
the machine and the tractor!
• Park the machine on firm, level ground.
1.6.2 On the Hydraulic
System
Do not connect the hydraulic lines to the
tractor until both hydraulic systems (machine
and tractor) are depressurised.
Any hydraulic system containing
an accumulator can remain
under pressure permanently
(even after following manual
depressurisation procedures with
a tractor / implement combination).
It is therefore important to check
all lines, pipes, and screw
connections regularly for leaks
and any recognisable external
damage.
The hydraulic circuit contains
specialised fittings which should
not be tampered with under any
circumstances. Do not attempt
to modify hose routings or hose
clamping arrangements, doing so
my cause serious damage to the
machine and/or injury.
1. Safety Data
1.5 Road Traffic Safety
When driving on public roads, tracks and
areas, it is important to observe the relevant
road traffic laws as well as the specific
regulations relating to this machine.
Pay attention to the permitted axle
loads, tyre carrying capacity, and
total weight in order to maintain
adequate braking and steerability.
Passengers on the machine are
strictly forbidden!
Check that lights / indicators (if
applicable) are working before
transporting the machine.
Max. road transport speed 16mph
(25km/h).