Canon DC210 - Manual (Page 34)

Playback 34
IMPORTANT
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Avoid the following actions while the disc
access display ( ) appears on screen, and
when the DISC access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover and do not remove
the disc.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
/
switch or the operating mode.
Slideshow
1 Press .
2 Select ( ) [ SLIDESHOW] and
press ( ).
3 Select ( ) [START] and press
( ).
• Images are played back one after
another.
• Press
to stop the slideshow.
Index Screen
1 Move the zoom lever toward W.
The still images index screen appears.
2 Select ( , ) an image.
• Move the green selection frame to
the image you want to view.
• If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the zoom
lever toward W to extend the green
selection frame to the whole page, and
move (
) between index pages.
Move the zoom lever toward T to return
to moving between single images.
3 Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
Image Jump Function
You can also quickly locate a specific
image without having to browse all of
them one by one.
T O RUN THROUGH THE STILL IMAGES
Push the joystick ( ) or ( ) and hold
it pressed down to run quickly through
the still images.
T O SKIP 10 OR 100 STILL IMAGES
1 If the joystick guide does not appear
on screen, press (
) to display it.
2 Push the joystick ( ) toward .
3 Select ( ) [ JUMP 10 IMAGES]
or [ JUMP 100 IMAGES].
4 Jump ( ) the number of images
selected.
Press ( ) to close the image jump
screen and display the image. You can
press (
) again to hide the joystick
guide.
SLIDESHOW
FUNC.
( 25)
FUNC.
FUNC.
D121C_NTSC-E.book Page 34 Thursday, January 11, 2007 2:46 PM