Great Plains DICKEY-john AI-100 - Manual (Page 4)

How to unlock the system
To unlock the system we must enter the unlock code.
- The unlock code is the WSMT serial
number with a 2 in front of it (for level 2)
- More info is toward the bottom of this
section on how to find the S/N for the
WSMT.
Select the summary button.
Select the padlock option.
Write in your password here:
Sec. 2
- Enter 2 followed by the WSMT Serial
Number which is found in the INFO screen.
This is explained on the last page of this
section.
Example: If the S/N is 10663 then the unlock code is 210663
-
Then touch OK
Once you have correctly entered the
unlock code then the words “Dealer
screens on” should appear at the
bottom of the screen as shown here.
You have unlocked the system to
level 2.
Now your summary screen should be
all yellow instead of gray.
This is an example of a system that is not unlocked,
when most of the screen is gray.
2012-12 4 401-908M