Great Plains DICKEY-john AI-100 - Manual (Page 13)

Select the Control On button to
engage the Planter .
*Note. Make sure that the planter is in the
ground and you are ready to plant.
Engaging planter hydraulic drive
Two ways to do this.
Option 1
Using the “soft key” on the screen.
**** All “soft key” (touch screen
buttons) that control a function are
buttons of intent!! This means that if
you want to turn your planter on you
must touch.
This is explained on the
last page in this section.
If you wish to shut it off you must
touch
Sec. 8
Option 2
Using the external switch.
*Notice the Control On button is not
present when the external switch is
configured.
When using the External Switch the icon
will leave and the Control On becomes
the switch that is wired to the main
harness.
This External Switch becomes the
new Control ON.
To engage the planter toggle the
switch to the On position to “turn”
the planter on.
*Note
To use the External Switch you
must first configure it on the IA
Screen first. To configure this
option see owners manual.
2012-12 13 401-908M