Great Plains DVN8552 Assembly Manual - Manual (Page 18)

14 8321-8552DV Great Plains Manufacturing, Inc.
550-353Q-ENG 02/12/2014
8333, 8548-8552 Center Fold
Refer to Figure 8
25. Mount front
and rear fold brackets to center
frame with 5/8 x 1 1/2 bolts , 5/8 lock washers and
nuts.
26. Attach plates of front wing stop , with 5/8 x 3 1/32 x
4 1/2 u-bolts , 5/8 lock washers and nuts. Position
plates of wing stop over truss mounting tube as
shown.
27. Insert the 1/2 x 4 1/2 pin w/keepers into round
tubes on rear of wing stop .
28. Attach rear wing stop on center frame tubes as
shown, with 5/8 x 3 1/32 x 5 1/2 u-bolts , 5/8 lock
washers and nuts.
29. Mount the SMV sign to wing stop, with 1/4 x 3/4
pan head screws , 1/4 lock washers and 1/4 nuts.
30. All bolts may be tightened to specs, See “Torque
Values Chart” on page 43.
1 2
3
4
5
6
4
7
8
9
10