Equipment identification, Machine label, Equipment identification machine label – Great Plains DVN8324 Operator Manual User Manual
Page 5: A1196x

11/25/2013
550-466M
Great Plains Manufacturing, Inc.
1
Equipment Identification
This Operator manual applies to the following Great
Plains pull-type secondary conventional tillage systems:
See “DVN Specifications and Capacities” on page 62
for precise swath information.
Refer to Figure 1
For positive equipment identification, consult the
machine label
located on the top of the left hand hitch
truss, near the single point depth control.
Machine Label
Models 8315DVN, 8318DVN, 8321DVN and 8324DVN
can be built to European regulatory and highway transport
standards.The machine can also be built to North Ameri-
can regulatory and highway transport standards, depend-
ing on which light option package is purchased.
Refer to Figure 2 (which is NOT from an actual machine)
The machine label provides data which is specific to your
machine as originally shipped from the factory.
If you, or the dealer, have added Options not originally
ordered with the machine, or removed Options that were
originally ordered, the weights and measurements no
longer are accurate for your machine. Update the Record
on the next page upon modifications.
See “Transporting the Discovator” on page 31 and
“DVN Specifications and Capacities” on page 62 for
additional weights and measurements.
8315DVN
4.8m, 27-shank, 24 blades
8318DVN
5.5m, 31-shank, 28 blades
8321DVN
6.6m, 37-shank, 32 blades
8324DVN
7.3m, 41-shank, 36 blades
Figure 1
Label/Plate Location
41585
1
1
G re a t P l a i n s
Model Number:
Serial Number:
Working Width m:
Transport Width m:
Year of Manufacture:
Total Weight kg:
Axle Load kg:
Drawbar Vertical Load kg:
99999 Kg 99999 Kg
99999 Kg
2011
99.9 m
99.9 m
A1196X
8315DVN
Manufacturing, Inc.
P.O. Box 5060
Salina, KS 67401 USA
A1196X
* G P - 1 8 7 9 D D *
819-197C
Figure 2:8315DVN:
Example Machine Label
42186