Great Plains DVN8324 Operator Manual - Manual (Page 46)

42 8315-8324DVN Great Plains Manufacturing, Inc.
550-466M 11/25/2013
Storage
Store the implement where children do not play. If possible,
store inside for longer life.
12. Raise, fold and lock implement (page 28 and page 24).
For unfolded storage, see steps at right.
13. Perform Parking checklist (page 41).
14. If equipped with optional air/hydraulic brake system,
drain water from reservoir (page 46).
15. Lubricate the implement at all points listed under
“Lubrication and Scheduled Maintenance” on
page 45.
16. Check all bolts, pins, fittings and hoses. Tighten, repair
or replace parts as needed.
17. Check all moving parts for wear or damage. Make
notes of any parts needing repair or replacement
before the next season.
18. Lubricate all points listed in Maintenance to prevent
rust.
19. Clean Discovator of mud, dirt, excess oil and grease.
20. Grease exposed cylinder rods to prevent rust.
21. Use touch-up paint to cover scratches, chips and worn
areas to prevent rust.
Unfolded Storage
See page 27 for details on maintenance lock.
12a
. Raise implement.
12b
. IVerify the transport locks are in the transport posi-
tion.
12c
. Be sure hydraulics are depressurized. Adjust locking
valves to the open position. Unfold wings until wing
is resting on shims.
12d
. Lower implement onto lock channels.
12e
. Set all hydraulic remotes to Float.