Great Plains DVN8324 Operator Manual - Manual (Page 14)

10 8315-8324DVN Great Plains Manufacturing, Inc.
550-466M 11/25/2013
Safety Decals and Lights
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Reflector: Slow Moving Vehicle (SMV)
On the back of smv post;
1 total
.
Reflectors: Red Triangles
One each rear fluorescent panel;
2 total
.
International: 818-055C North America: 818-055C
41595
International: 833-399C North America: n/a
(North American models
use
818-055C SMV reflectors,
838-614C red reflectors &
838-615C amber reflectors.)
43256