Great Plains 3S-3000HD Assembly Instructions - Manual (Page 2)

Great Plains Mfg., Inc.
2 Main Seed Box Agitator Kit
118-253M 03/24/2009
Before You Start
Compatibility
Refer to Figure 2
1.
Check the serial number plate against the table on
page 1. Verify from the serial number or date of
manufacture that the drill is compatible with this kit.
2. Check for an installation of Fertilizer (“HDF” model,
or divided main box, and a transmission at front left
of each section). If the drill has Fertilizer, do not
install this kit.
3. Check for an installation of Small Seeds (small seed
box at upper rear of main box). If the drill has Small
Seeds options installed, do not install this kit.
4. Check for an installation of Point Row option (sole-
noid valve block behind pressure adjustment valves,
mechanical clutch in center section). If the drill has
Point Row installed, do not install this kit.
Note: This kit is compatible with the electric clutch
option.
Inventory
5. Make sure all parts are present.
Comprehension
6. Review these instructions. Make sure the installers
understand where each part or assembly is
installed, and what tools are required for the task.
Note: Some sequences in these instructions have you
update one box at a time. Parts are removed and
re-installed. Parts can vary between boxes, with
some risk of part mix-up if all disassembly is done
at once.
Note: Illustrations in this manual, based on the parts
manuals for this family of drills, may show
exploded views that are fully disassembled. Rely
on the instructions for required disassembly and
reassembly steps.
Figure 2
Serial Number Plate
15614
U
D
F
B
L
R