Practice safe maintenance, Prepare for emergencies, Safety at all times – Great Plains 1005NT Assembly Instructions User Manual
Page 4

2
7ft and 10ft EWNT Small Seeds
Great Plains Manufacturing, Inc.
123-535M
06/02/2008
Practice Safe Maintenance
▲ Understand procedure before doing work. Use proper tools
and equipment. Refer to this manual for additional informa-
tion.
▲ Work in a clean, dry area.
▲ Make sure all moving parts have stopped and all system
pressure is relieved.
▲ Inspect all parts. Make sure parts are in good condition and
installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from implement before
operation.
Prepare for Emergencies
▲ Be prepared if a fire starts.
▲ Keep a first aid kit and fire extinguisher handy.
▲ Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.
Safety At All Times
▲ Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on the
safety decals.
▲ Be familiar with all implement functions.
▲ Operate machinery from the driver’s seat only.
▲ Do not leave implement unattended with tractor engine
running.
▲ Wear snug-fitting clothing to avoid entanglement with mov-
ing parts.
OFF
911
- 1005NG Assembly Instructions 1005NF Assembly Instructions EWNT10 Assembly Instructions EWNG10 Assembly Instructions EWNF10 Assembly Instructions EWNT7 Assembly Instructions EWNG7 Assembly Instructions EWNF7 Assembly Instructions 705NT Assembly Instructions 705NG Assembly Instructions 705NF Assembly Instructions