Great Plains 3000TM Assembly Manual - Manual (Page 15)

Great Plains Manufacturing, Inc. Assembly 11
11/12/2013 586-536Q-ENG
Front Trusses & Level Bar
Refer to Figure 9
22. Install rear level bar
to torque tube with 1 x 9 1/2
pins , 3/8 x 2 1/4, Gr. 8 hex bolts and 3/8 nylon
lock nut.
23. Install h-bracket assembly to front of rear level bar
with 3/4 x 2, Gr. 8 hex bolts , 3/4 lock washers
and 3/4 nuts.
24. Install bottom of h-bracket assembly to center
brace bar with 1 x 3 1/4 clevis pin , 1.5 x 1.00
x.075 machine washer and 3/16 x 2 cotter pin.
25. Attach front hitch trusses with 3/4 x 2 hex bolt
(front plate), 3/4 x 2 1/2 hex bolt (rear plates), 3/4
lock washers and 3/4 nuts.
26. Tighten all bolts with lock nuts snug, but do not
torque. The rest of the bolts may be tightened to
specs, See “Torque Values Chart” on page 38.
1
2 3
4
1 5
4
6
7
8 9
10
U
D
F
B
L
R
6
1
4
5
Figure 9
Front Trusses & Level Bar 42957
8
9
8
7
2
3
10