Great Plains 3000TM Assembly Manual - Manual (Page 13)

Great Plains Manufacturing, Inc. Assembly 9
11/12/2013 586-536Q-ENG
Center Transport 1800
Refer to Figure 6
9. Slide hub/spindle assembly into torque tube and
align holes. Secure with 1/2 x 4 1/2 hex bolts and 1/2
top lock nut.
10. Attach tire/wheel assembly with 5/8 lug nuts .
11. Tighten all bolts with lock nuts snug, but do not torque.
The rest of the bolts may be tightened to specs, See
“Torque Values Chart” on page 38.
Center Transport 2400-3000
Refer to Figure 7
12. Slide walking beam assembly into torque tube and
align holes. Secure with 1/2 x 6, Gr. 8 hex bolts and 1/
2 top lock nut.
13. Slide hub/spindle assemblies into walking beam
assembly and align holes. Secure with 1/2 x 5 hex
bolts and 1/2 top lock nut.
14. Attach tire/wheel assemblies with 5/8 lug nuts .
15. Tighten all bolts with lock nuts snug, but do not torque.
The rest of the bolts may be tightened to specs, See
“Torque Values Chart” on page 38.
1
U
D
F
B
L
R
4
Figure 6
Center Transport 1800
42952
3
5
2
1 2
3
4 5
4
U
D
F
B
L
R
6
5
Figure 7
Center Transport 2400-3000
42953
3
7
2
4
1
1 2
3
4
1
5
6 7