Great Plains Terra-Tine Row Cleaner - Manual (Page 11)

5/2/2005 207-016M
9 Operating and Assembly Instructions
Assembly Instructions for
mounting the attachment tube
to frame
The mounting tube must be mounted as shown for
row cleaners to work properly.
Refer to Figure 4
Note: The longer 4”x2” tube must be mounted on
the left side of the planter.
1. The 4”x2” mounting tube (2) must be mount-
ed so that the distance from the end of the
tube is 1” from the end of the cap of the 7”x7”
tube (1) as shown.
2. Using the attachment mounting holes (3), at-
tach attachment tube to frame using 5/8” x 4
1/32” x 3 3/8” u-bolt (4), 5/8” lock washer, and
5/8” hex nut.
Assembly Instructions for posi-
tioning row cleaner with opener
Note: Rows located directly behind gauge wheels
require the use of the offset shank to properly lo-
cate Terra-Tine™.
Refer to Figure 5
1. Position single row cleaner where the center
of the Terra-Tine™ wheel is approximatly with
the center of the opener.
2. Position dual row cleaner mount approxi-
mately 4” from center of opener mount.
Figure 4
Location of Mounting Tube
22942
Figure 5
Row Cleaner Locations
22941