Monarch Instrument Pocket LED Strobe - Manual (Page 15)

11
Press MENU to select, use the UP/DOWN button ▲▼ to select
a memory location, press MENU to select the location. The fl ash
rate is shown on the top row, memory location on the bottom row
(see below).
3600
SM 3 (SM = Save Memory)
Press MENU to save and EXIT OUT OF MENU. The unit will
indicate
DONE when the value has been changed.
3.3.4 LOAD
Loads the saved fl ash rate from a memory location. Press MENU
to select, use the UP/DOWN button ▲▼ to select the memory
location, press MENU to select. The fl ash rate is shown on the top
row, memory location on the bottom row (see below).
3600
RM 3 (RM = Recall Memory)
Press MENU to recall fl ash rate and EXIT OUT OF MENU.
3.3.5 UNITS
Selects the engineering units for the display. When the display
shows:
SEtUP
UNITS
Press MENU to select, use the UP/DOWN button ▲▼ to select
the units. The units depend on the MODE of the unit. The options
are RPM/RPS (Revolutions per Minute/Second).
Unit
RPM
Press MENU to save and exit back to the main menu or press ◄
to return to the main menu without saving. The unit will indicate
DONE when the value has been changed.