Monarch Instrument Pocket LED Strobe - Manual (Page 13)

9
MENU (B) at any time to select that setup option. Note that currently
selected options are indicated by the star icon ( ).
Setup options are in order as follows:
MODE > BRITE > SAVE > LOAD > UNITS > BKLIT > DECPT >
INPUT
These options are described in the following sections. Note that the
order of the options within each setup option may change depending
on current operating settings.
3.3.1 MODE
Set the strobe into the fl ash (strobe) mode or the tachometer (no
fl ash) mode. When the display shows:
SETUP
MODE
Press the MENU button to enter. The mode can be set to Tach or
Strobe.
Tach - No LED fl ash - use external input to show RPM
TACH
MODE
Press MENU to save and return to the main menu, or
use UP/DOWN button ▲▼ to change to:
Strobe - Internal generator - fl ash LEDs
STRBE
MODE
Press MENU to save and return to the main menu or press ◄ to
return to the main menu without saving. The unit will indicate
DONE when the value has been changed.